Improved Interfacial Bonding Strength and Reliability of Functionalized Graphene Oxide for Cement Reinforcement Applications

Poor bonding strength between nanomaterials and cement composites inevitably lead to the failure of reinforcement. Herein, a novel functionalization method for the fabrication of functionalized graphene oxide (FGO), which is capable of forming highly reliable covalent bonds with cement hydration products, and therefore, suitable for use as an efficient reinforcing agent for cement composites, is discussed. The bonding strength between cement and aggregates was improved more than 21 times with the reinforcement of FGO. The fabricated FGO also demonstrated many important features, including high reliability in cement pastes, good dispersibility, and efficient structural refinement of cement hydration products. With the incorporation of FGO, cement mortar samples demonstrated up to 40 % increased early and ultimate strength. Such results make the fast demolding and manufacture of light constructions become highly possible, and show strong advantages on improving productivity, saving cost, and reducing CO₂ emissions in practical applications.     

The green synthesis of exceptional braided,helical carbon nanotubes and nanospiral platelets made directly from CO2

Helical carbon nanotubes currently cost ~15,000–19,000 USD/kg commercially and are ~10–15 times the price of straight carbon nanotubes of similar dimensions. They have not previously been made from the greenhouse gas CO₂ nor had new variants of the helical morphology been demonstrated. In this study, a novel, inexpensive electrosynthesis of these helical nanocarbon materials from CO₂ is presented. This material may be produced by molten carbon growth conditions that (1) maximize torsional stresses, such as those that may occur during rapid, nucleated carbon reduction, (2) enhance defects that cause formation of heptagonal, rather than the conventional hexagonal building blocks of graphene cylindrical walls, and (3) uniformly control those enhanced defects to repeatedly induce a uniform spiral conformation. These conditions are achieved with at least two of the following experimental conditions: (i) high electrolysis current density, (ii) sp³ defect-inducing agents, such as added oxide, and (iii) controlled concentration of iron added to the electrolyte or cathode. Here, it is shown with SEM, TEM, EDX, XRF, and Raman spectroscopy that a molten controlled electrolyte carbonate synthesis to induce defect formation, and a high rate of electrolysis (0.6 A/cm²) leads to a high yield of helical nanotubes, helical nanofibers, or helical nanoplatelet carbon morphologies.     

Shape‐directed platinum nanoparticle synthesis: nanoscale design of novel catalysts

Platinum‐based catalytic materials have received significant attention, particularly in the shape and size control of faceted materials for catalysis. More recently, there has been a rapid increase in the number of reports of successful preparations in this field; however, a fundamental understanding of controlled growth towards catalytic material design is essential for future implementation and broad application. In this review, we provide an overview of the recent findings reported since 2009, focusing on methods for shape control as well as the effects of exposed surface facets on select catalytic reactions. Copyright © 2013 John Wiley & Sons, Ltd.     

3D Printable Geopolymer Composites Reinforced with Carbon-Based Nanomaterials – A Review

Three-dimensional (3D) geopolymer printing (3DGP) technology is a rapidly evolving digital fabrication method used in the construction industry. This technology offers significant benefits over 3D concrete printing in terms of energy saving and reduced carbon emissions, thus promoting sustainability. 3DGP technology is still evolving, and researchers are striving to develop high-performance printable materials and different methods to improve its robustness and efficiency. Carbon-based nanomaterials (CBNs) with beneficial properties have a wide range of applications in various fields, including as concrete/geopolymer systems in construction. This paper comprehensively reviews the research progress on carbon-based nanomaterials (CBNs) used to develop extrusion-based 3D geopolymer printing (3DGP) technology, including dispersion techniques, mixing methods, and the materials′ performance. The rheological, mechanical, durability, and other characteristics of these materials are also examined. Furthermore, the existing research limitations and the prospects of using 3DGP technology to produce high-quality composite mixtures are critically evaluated.     

Highly Efficient Solid‐Phase Labeling of Saccharides within Boronic Acid Functionalized Mesoporous Silica Nanoparticles

Labeling is critical for the detection, quantitation, and structural identification of saccharides. However, conventional liquid‐phase labeling suffers from apparent disadvantages, such as time‐consuming, the presence of excessive labeling reagent, and high applicable saccharide concentration. A solid‐phase approach is presented for highly efficient labeling of saccharides, using boronic acid functionalized mesoporous silica nanoparticles (MSNs) as a selective extraction sorbent and nanoscale reactor. The solid‐phase labeling approach exhibited several significant advantages, including: much faster reaction speed (taking only 2 min), high product purity, and much lower applicable saccharide concentration (four orders of magnitude lower than that of liquid‐phase labeling). Thus, this labeling approach opens up new avenues to the facile and efficient labeling of saccharides.     

A Filled‐Honeycomb‐Structured Crystal Formed by Self‐Assembly of a Janus Polyoxometalate–Silsesquioxane (POM–POSS) Co‐Cluster

Clusters with diverse structures and functions have been used to create novel cluster‐assembled materials (CAMs). Understanding their self‐assembly process is a prerequisite to optimize their structure and function. Herein, two kinds of unlike organo‐functionalized inorganic clusters are covalently linked by a short organic tether to form a dumbbell‐shaped Janus co‐cluster. In a mixed solvent of acetonitrile and water, it self‐assembles into a crystal with a honeycomb superstructure constructed by hexagonal close‐packed cylinders of the smaller cluster and an orderly arranged framework of the larger cluster. Reconstruction of these structural features via coarse‐grained molecular simulations demonstrates that the cluster crystallization and the nanoscale phase separation between the two incompatible clusters synergistically result in the unique nano‐architecture. Overall, this work opens up new opportunities for generating novel CAMs for advanced future applications.     

Electrochemical sensors and biosensors based on redox polymer/carbon nanotube modified electrodes: A review

The aim of this review is to present the contributions to the development of electrochemical sensors and biosensors based on polyphenazine or polytriphenylmethane redox polymers together with carbon nanotubes (CNT) during recent years. Phenazine polymers have been widely used in analytical applications due to their inherent charge transport properties and electrocatalytic effects. At the same time, since the first report on a CNT-based sensor, their application in the electroanalytical chemistry field has demonstrated that the unique structure and properties of CNT are ideal for the design of electrochemical (bio)sensors. We describe here that the specific combination of phenazine/triphenylmethane polymers with CNT leads to an improved performance of the resulting sensing devices, because of their complementary electrical, electrochemical and mechanical properties, and also due to synergistic effects. The preparation of polymer/CNT modified electrodes will be presented together with their electrochemical and surface characterization, with emphasis on the contribution of each component on the overall properties of the modified electrodes. Their importance in analytical chemistry is demonstrated by the numerous applications based on polymer/CNT-driven electrocatalytic effects, and their analytical performance as (bio) sensors is discussed.     

Gold nanomaterials based pseudostationary phases in capillary electrophoresis: A brand‐new attempt at chondroitin sulfate isomers separation

In this work, a CE method with bare gold nanorods (GNRs) based pseudostationary phase was developed and applied for the separation of chondroitin sulfate (CS) isomers, CS, and dermatan sulfate (DS). The separation efficiency was investigated by varying the experimental parameters such as concentration and pH of the BGE, separation voltage, internal diameter of capillary, different size, and morphology of gold nanomaterials. Results showed that different size and morphology of gold nanomaterials had different effects on the separation of CS and DS. The best separation of CS and DS was achieved in the BGE composed of aqueous 150 mmol/L (mM) ethylenediamine + 20 mM sodium dihydrogen phosphate + 30% v/v GNRs, pH 4.5, at the separation voltage of ?10 kV. Capillary was 59.2 cm in length (effective length 49 cm), 50 μm id capillary thermostated at 25°C. CE with bare GNRs used as pseudostationary phase was shown to be a suitable technique for the separation of CS and DS mixtures with wider peaks. RSD of migration time and peak area of CS and DS were 0.13, 0.14 and 0.86, 1.07%, respectively.     

手性无机纳米材料圆偏振发光的研究进展

手性无机纳米材料因为具有优异的光物理特性及广泛的应用价值而备受关注。通过采用手性配体对无机纳米材料的表面进行修饰或将无机纳米材料与手性模板进行组装获得的手性结构,可以与光子强烈作用引起偏振态的改变,产生圆偏振光(circularly polarized light, CPL)。从产生机理来讲,CPL主要包括圆偏振荧光和圆偏振散射,在一些情况下这两个机理是共存的。本文总结了硫族半导体纳米材料、金属纳米团簇、钙钛矿、镧系配合物及其他复合纳米材料中CPL的研究进展。此外,还讨论了不同的手性无机纳米材料中CPL的主要来源。本综述得出的结论有望在分子水平上实现对CPL活性材料的各向异性因子进行调控,促进其在量子计算、光学数据存储、信息加密、3D显示器和光学传感等多个领域的发展。